74AHC594D-Q100,118
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Automotive, AEC-Q100, 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74AHC594 |
| Function | Serial to Parallel, Serial |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 15.6 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| fmax-Min | 70 MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHC594D-Q100,118 Overview
Embedded in a package of type 16-SOIC (0.154, 3.90mm Width), the device is available for use. Chip terminations add up to 16. Presented in a case of Tape & Reel (TR). This part has an operating supply voltage of 5V. On this part, there are 1 elements. It is equipped with a pin count of 16. It is recommended that the mount should be done by Surface Mount. An electronic component is included in the AHC/VHC/H/U/V. Mounting of this component is indicated by Surface Mount. A temperature range of -40°C~125°C is used for the operating environment. During operation, the voltage is within the range of 2V~5.5V. This electrical component belongs to the Automotive, AEC-Q100, 74AHC series. Similar parts can be found using the 74AHC594 family. It's noted that the chip's operating supply voltage is in the range 5V. There should be no voltage less than 2V at the minimum supply voltage (Vsup).
74AHC594D-Q100,118 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74AHC594 family
Operate supply voltage at 5V
74AHC594D-Q100,118 Applications
There are a lot of Nexperia USA Inc. 74AHC594D-Q100,118 Shift Registers applications.
- Sequence generator
- Serial-to-parallel data conversion
- 8-bit data storage
- Pseudo Random Pattern Generator
- Interconnectors
- Pattern Recognizers
- 7-segment display control
- Remote control holding register
- Data manipulation
- Serial to parallel converter