74AHC594BQ,115
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHC594 |
| Function | Serial to Parallel, Serial |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 15.6 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Length | 3.5mm |
| Width | 2.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AHC594BQ,115 Overview
As a result, 16-VFQFN Exposed Pad package contains the embedded device. A total of 16 terminations can be found on the chip. Tape & Reel (TR) is the case in which it is packed. Its operating supply voltage is rated at 5V. 16 pins are provided on the device. Surface Mount is recommended for mounting. It is a component of the HC/UH. As you can see, this component is mounted in the way of Surface Mount. A temperature range of -40°C~125°C is used for the operating environment. During operation, the voltage is within the range of 2V~5.5V. The 74AHC series contains this electrical component. You can search for similar parts based on the 74AHC594 family. It's noted that the chip's operating supply voltage is in the range 5V. There should be no voltage less than 2V at the minimum supply voltage (Vsup). A device with 1 input lines is available. It is necessary to operate 9 output lines.
74AHC594BQ,115 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74AHC594 family
Operate supply voltage at 5V
With 9 output lines
74AHC594BQ,115 Applications
There are a lot of Nexperia USA Inc. 74AHC594BQ,115 Shift Registers applications.
- temporary data storage
- LED matrix control
- ROM Chips
- Serial-to-parallel data conversion
- Remote control holding register
- Cache memory in CPU
- 7-segment display control
- Sequence generator
- Serial-to-parallel data conversion
- Data Processors