74AHC273BQ-Q100X
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74AHC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | QUAD |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74AHC273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 110MHz |
| Propagation Delay | 21.5 ns |
| Quiescent Current | 4μA |
| Family | AHC/VHC/H/U/V |
| Current - Output High, Low | 8mA 8mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 4.5mm |
| Width | 2.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHC273BQ-Q100X Overview
The item is packaged in 20-VFQFN Exposed Padcases. It is included in the package Tape & Reel (TR). T flip flop uses Non-Invertedas the output. This trigger is configured to use Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates at 2V~5.5Vvolts. Temperature is set to -40°C~125°C TA. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 74AHCseries of FPGAs. You should not exceed 110MHzin its output frequency. A total of 1elements are present in it. Terminations are 20. The object belongs to the 74AHC273 family. A voltage of 5V is used as the power supply for this D latch. A 3pFfarad input capacitance is provided by this T flip flop. The electronic device belongs to the AHC/VHC/H/U/Vfamily. The electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. This device's clock edge trigger type is Positive Edge. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. Optimal efficiency requires a supply voltage of 5V. There is a consumption of 4μAof quiescent current from it.
74AHC273BQ-Q100X Features
Tape & Reel (TR) package
74AHC series
20 pins
74AHC273BQ-Q100X Applications
There are a lot of Nexperia USA Inc. 74AHC273BQ-Q100X Flip Flops applications.
- Supports Live Insertion
- Buffered Clock
- ESD performance
- Parallel data storage
- Set-reset capability
- ESCC
- Computers
- Count Modes
- Cold spare funcion
- Instrumentation