74ACT377SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2001 |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 175MHz |
| Base Part Number | 74ACT377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 175MHz |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 6.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 8 |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT377SJ Overview
20-SOIC (0.209, 5.30mm Width)is the way it is packaged. It is included in the package Tube. Non-Invertedis the output configured for it. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. A voltage of 4.5V~5.5Vis required for its operation. It is operating at a temperature of -40°C~85°C TA. The type of this D latch is D-Type. In terms of FPGAs, it belongs to the 74ACT series. This D flip flop should not have a frequency greater than 175MHz. The element count is 1 . It consumes 40μA of quiescent The 74ACT377 family contains this object. Its input capacitance is 4.5pFfarads. Electronic part Surface Mountis mounted in the way. Basically, it is designed with a set of 20 pins. This device exhibits a clock edge trigger type of Positive Edge. 8bits are used in its design. Despite its superior flexibility, it relies on 8 circuits to achieve it. If high efficiency is desired, the supply voltage should be kept at 5V. In order to operate, the chip has 8 output lines. 8input lines are available for you to choose from. It is set to -24mAfor the high level output current. Low level output current is set to 24mA. It is recommended that the operating temperature be lower than 85°C. Operating temperatures should be above -40°C. The RS flip flop is designed to operate with a minimal supply voltage of 4.5VV. 5.5Vis the maximum supply voltage supported by it. A frequency of 175MHzcan be achieved.
74ACT377SJ Features
Tube package
74ACT series
20 pins
8 Bits
74ACT377SJ Applications
There are a lot of ON Semiconductor 74ACT377SJ Flip Flops applications.
- Memory
- Power down protection
- Counters
- QML qualified product
- Reduced system switching noise
- Pattern generators
- Guaranteed simultaneous switching noise level
- Computing
- Matched Rise and Fall
- Shift Registers