74ACT374SCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 90MHz |
| Base Part Number | 74ACT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 160MHz |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 8.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Frequency | 90MHz |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT374SCX Overview
It is embeded in 20-SOIC (0.295, 7.50mm Width) case. You can find it in the Tape & Reel (TR)package. As configured, the output uses Tri-State, Non-Inverted. This trigger uses the value Positive Edge. There is an electric part mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C TAis considered to be the operating temperature. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 74ACT series. You should not exceed 160MHzin the output frequency of the device. In total, there are 1 elements. As a result, it consumes 40μA quiescent current and is not affected by external forces. This D latch belongs to the family of 74ACT374. There is 4.5pF input capacitance for this T flip flop. Surface Mount mounts this electronic component. There are 20pins on it. It has a clock edge trigger type of Positive Edge. There are 8bits in its design. Its flexibility is enhanced by 8 circuits. The supply voltage should be maintained at 5V for high efficiency. The JK flip flop is with 3 output lines to operate. It is reported that there are 1 input lines. -24mAis set as the high level output current. In the low level output current setting, 24mAis used. If the operating temperature is lower than 85°C, it is recommended. The operating temperature should be higher than -40°C. It is powered by 4.5V as its minimum supply voltage. 5.5Vis its maximum supply voltage. The frequency that can be achieved is 90MHz.
74ACT374SCX Features
Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
74ACT374SCX Applications
There are a lot of ON Semiconductor 74ACT374SCX Flip Flops applications.
- Single Down Count-Control Line
- ESCC
- Memory
- Automotive
- Functionally equivalent to the MC10/100EL29
- Test & Measurement
- Shift registers
- Balanced 24 mA output drivers
- Latch
- QML qualified product