74ACT374MSAX
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 160MHz |
| Family | ACT |
| Current - Quiescent (Iq) | 40μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74ACT374MSAX Overview
20-SSOP (0.209, 5.30mm Width)is the way it is packaged. The package Tape & Reel (TR)contains it. T flip flop is configured with an output of Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. It is operating at -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74ACTseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 160MHz. A total of 1elements are present in it. Despite external influences, it consumes 40μAof quiescent current. Terminations are 20. The power supply voltage is 5V. A 4.5pFfarad input capacitance is provided by this T flip flop. ACTis the family of this D flip flop. There is a 5.5Vmaximum supply voltage (Vsup). If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V. This D flip flop is equipped with 0 ports.
74ACT374MSAX Features
Tape & Reel (TR) package
74ACT series
74ACT374MSAX Applications
There are a lot of Rochester Electronics, LLC 74ACT374MSAX Flip Flops applications.
- Individual Asynchronous Resets
- Convert a momentary switch to a toggle switch
- ATE
- Communications
- Bounce elimination switch
- ESCC
- Data storage
- Shift registers
- Load Control
- Storage registers