74ACT299MTC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | HOLD MODE; COMMON I/O PINS; GATED OUTPUT CONTROL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 18 ns |
| Family | ACT |
| Logic Function | Shift Register |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 3 |
| Count Direction | BIDIRECTIONAL |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT299MTC Overview
The device is embedded in TSSOP package. It sums up to 20 where the chip's terminations add up. The part's operating supply voltage is rated 5V. 1 elements are present in this part. It has 20 pins. The recommended mounting method is Surface Mount. Electronic components are categorized as ACT. This section has the following additional features: HOLD MODE; COMMON I/O PINS; GATED OUTPUT CONTROL. A total of 8 bits are present on an IC chip. In total, there are 20 pins on it. This product should not be used at temperatures above 85°C. For this device to operate, it cannot be lower than -40°C. It is employed under the condition of 5V. The supply voltage is higher than 4.5V. A total of 3 output lines are available for operation. In this device, there are 8 circuits.
74ACT299MTC Features
With 20 pins
With 3 output lines
74ACT299MTC Applications
There are a lot of Rochester Electronics 74ACT299MTC Shift Registers applications.
- 7-segment display control
- Remote control holding register
- Counter
- temporary data storage
- LED matrix control
- Dual-rank shift, hold, and bus applications
- Data Processors
- Serial-to-parallel data conversion
- Pulse Extenders
- Data Format Converters