74ACT11139PWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ACT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Decoder/Demultiplexer |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACT11139 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Number of Circuits | 2 |
| Power Dissipation | 774mW |
| Number of Bits | 4 |
| Throw Configuration | DP4T |
| Propagation Delay | 7.8 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 8.5 ns |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Voltage Supply Source | Single Supply |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ACT11139PWR Overview
Providing this information in the 16-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.As a result, it is packaged in a way that is referred to as Cut Tape (CT).As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses IC Decoder/Demultiplexer as the analog IC.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.Multiplexers in the 74ACT series are suitable for a wide range of applications.The base part number is 74ACT11139, which is also useful when looking up signal switch's related components.As a type of supply, Single is employed.The board has 16 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.In this signal multiplexer, there are 4 bits provided.In order for the turn signal switch to work, there are 4 outputs.Despite not interacting with external factors, it consumes 8μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.In order for the digitalswitch to function normally, it has 2 circuits.
74ACT11139PWR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
74ACT11139PWR Applications
There are a lot of Texas Instruments 74ACT11139PWR Signal Switches / Multiplexers / Decoders applications.
- Memory chips
- Speed synchronization of multiple motors in industries
- Automatic health monitoring systems
- Seven segment displays
- Data-routing applications
- To select different devices in microprocessor output
- HD surveillance system
- Logic circuits
- Signal router
- Data bus control