74ACT109SCX
| Parameters | |
|---|---|
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Frequency | 125MHz |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 5 |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | JK Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 125MHz |
| Base Part Number | 74ACT109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 2 |
| Clock Frequency | 210MHz |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 7 ns |
74ACT109SCX Overview
It is embeded in 16-SOIC (0.154, 3.90mm Width) case. Package Tape & Reel (TR)embeds it. This output is configured with Differential. In the configuration of the trigger, Positive Edgeis used. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at a voltage of 4.5V~5.5V. Temperature is set to -40°C~85°C TA. A flip flop of this type is classified as a JK Type. JK flip flop is a part of the 74ACTseries of FPGAs. A frequency of 210MHzshould be the maximum output frequency. In total, it contains 2 elements. As a result, it consumes 20μA quiescent current and is not affected by external forces. The object belongs to the 74ACT109 family. Its input capacitance is 4.5pFfarads. It is mounted in the way of Surface Mount. 16pins are included in its design. Its clock edge trigger type is Positive Edge. Flip flops designed with 2bits are used in this part. Its flexibility is enhanced by 2 circuits. High efficiency requires the supply voltage to be maintained at 5V. There are 2 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It has 5lines. It is set to -24mAfor the high level output current. The low level output current is set to 24mA. Ideally, the operating temperature should be below 85°C. In order for the system to operate properly, the temperature should be higher than -40°C. The minimum voltage required for operation is 4.5V. 5.5Vis the maximum supply voltage supported by it. The frequency that can be achieved is 125MHz.
74ACT109SCX Features
Tape & Reel (TR) package
74ACT series
16 pins
2 Bits
74ACT109SCX Applications
There are a lot of ON Semiconductor 74ACT109SCX Flip Flops applications.
- Shift registers
- Computing
- Dynamic threshold performance
- Synchronous counter
- Functionally equivalent to the MC10/100EL29
- Individual Asynchronous Resets
- ESD protection
- Balanced Propagation Delays
- ESCC
- Asynchronous counter