74AC374SCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Frequency | 100MHz |
| Base Part Number | 74AC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Clock Frequency | 155MHz |
| Propagation Delay | 15.5 ns |
| Turn On Delay Time | 8 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Frequency | 100MHz |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74AC374SCX Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. It is contained within the Tape & Reel (TR)package. Currently, the output is configured to use Tri-State, Non-Inverted. This trigger uses the value Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~6V volts. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the 74AC series. You should not exceed 155MHzin the output frequency of the device. In total, it contains 1 elements. As a result, it consumes 40μA quiescent current. The object belongs to the 74AC374 family. This T flip flop has a capacitance of 4.5pF farads at the input. In this case, the electronic component is mounted in the way of Surface Mount. This board has 20 pins. A Positive Edgeclock edge trigger is used in this device. Flip flops designed with 8bits are used in this part. Despite its superior flexibility, it relies on 8 circuits to achieve it. In order for the chip to function, it has 8output lines. 1input lines are available for you to choose from. A -24mAis set for the high level output current. Low level output current is set to 24mA. Ideally, the operating temperature should be below 85°C. The operating temperature should be higher than -40°C. It is powered by 2V as its minimum supply voltage. 6Vis its maximum supply voltage. 100MHzis the maximum frequency that can be achieved.
74AC374SCX Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
74AC374SCX Applications
There are a lot of ON Semiconductor 74AC374SCX Flip Flops applications.
- Cold spare funcion
- Patented noise
- ESD protection
- Dynamic threshold performance
- Storage registers
- Parallel data storage
- Latch-up performance
- Buffer registers
- Circuit Design
- CMOS Process