74AC373PC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Family | AC |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | TRUE |
| Independent Circuits | 1 |
| Delay Time - Propagation | 7ns |
| Height Seated (Max) | 5.33mm |
| Length | 25.905mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74AC373PC Overview
In the 20-DIP (0.300, 7.62mm) package, it is embedded. It is packaged in the way of Tube. It uses the output configuration Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. A Through Hole mount is used for mounting this electronic part. It operates at a voltage of 2V~6V. A temperature of -40°C~85°C is set as the operating temperature. The 74AC series is associated with this FPGA. An electronic part with 8 bits is designed. A device such as this has 20 terminations designed. A 3.3V voltage supply is required for operation. With 20 pins, it is equipped. AC is the family of this electronic device. In this device, there are 2 ports. Vsup reaches 6V as the maximum supply voltage. If the supply voltage (Vsup) is greater than 2V, then the device is working correctly.
74AC373PC Features
20-DIP (0.300, 7.62mm) package
74AC series
8 Bits
20 pin count
74AC373PC Applications
There are a lot of Rochester Electronics, LLC 74AC373PC Latches applications.
- Parallel Output
- Buffer/Storage Registers
- Automotive ADAS
- Up/down difference counting
- Relay replacement
- A/D converters
- Counter
- Timers
- Programmable binary
- OC-48 communication systems