74ABT16821ADGG,112
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT16821 |
| JESD-30 Code | R-PDSO-G56 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 250MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 1mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 3.3ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 3.7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Propagation Delay (tpd) | 3.7 ns |
| Power Supply Current-Max (ICC) | 19mA |
| Max Frequency@Nom-Sup | 160000000Hz |
| Length | 14mm |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
74ABT16821ADGG,112 Overview
It is packaged in the way of 56-TFSOP (0.240, 6.10mm Width). As part of the package Tube, it is embedded. There is a Tri-State, Non-Invertedoutput configured with it. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 4.5V~5.5Vis required for its operation. Temperature is set to -40°C~85°C TA. The type of this D latch is D-Type. FPGAs belonging to the 74ABTseries contain this type of chip. There should be no greater frequency than 250MHzon its output. D latch consists of 2 elements. As a result, it consumes 1mA quiescent current. A total of 56 terminations have been made. This D latch belongs to the family of 74ABT16821. Power is provided by a 5V supply. Input capacitance of this device is 3pF farads. ABTis the family of this D flip flop. This part is included in FF/Latches. There is a 5.5Vmaximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 4.5V. The D latch runs on a voltage of 5V volts. The flip flop contains 2ports.
74ABT16821ADGG,112 Features
Tube package
74ABT series
5V power supplies
74ABT16821ADGG,112 Applications
There are a lot of NXP USA Inc. 74ABT16821ADGG,112 Flip Flops applications.
- Data transfer
- High Performance Logic for test systems
- Count Modes
- Matched Rise and Fall
- Guaranteed simultaneous switching noise level
- Supports Live Insertion
- Memory
- Clock pulse
- Registers
- Buffer registers