74ABT16273DGG,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Base Part Number | 74ABT16273 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Clock Frequency | 240MHz |
| Current - Quiescent (Iq) | 1mA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 3.4ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 4 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Max Frequency@Nom-Sup | 150000000Hz |
| RoHS Status | ROHS3 Compliant |
74ABT16273DGG,118 Overview
The item is packaged in 48-TFSOP (0.240, 6.10mm Width)cases. You can find it in the Tape & Reel (TR)package. This output is configured with Non-Inverted. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. It is operating at -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. In FPGA terms, D flip flop is a type of 74ABTseries FPGA. Its output frequency should not exceed 240MHz Hz. In total, it contains 2 elements. It consumes 1mA of quiescent current without being affected by external factors. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The object belongs to the 74ABT16273 family. A voltage of 5V is used as the power supply for this D latch. This JK flip flop has a 4pFfarad input capacitance. The RS flip flops belongs to FF/Latches base part number. An electrical current of 5V volts is applied to it.
74ABT16273DGG,118 Features
Tape & Reel (TR) package
74ABT series
5V power supplies
74ABT16273DGG,118 Applications
There are a lot of NXP USA Inc. 74ABT16273DGG,118 Flip Flops applications.
- Balanced 24 mA output drivers
- Clock pulse
- Data transfer
- Divide a clock signal by 2 or 4
- Latch-up performance
- Bounce elimination switch
- Cold spare funcion
- Single Down Count-Control Line
- CMOS Process
- Computing