72V801L15PFI
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 256X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V801L15PFI Overview
FIFO memory chip is contained in the TQFP package.It is pointing in the direction of Surface Mount .It is possible to achieve high efficiency with a supply voltage of 3.3V .A total of 64 terminations are contained within FIFO means.There are 64 pins for operation.FIFO design requires a maximum current of 40mA to operate.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -40°C degrees Celsius.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.FIFOs contains this gadget in its entirety.This part has a memory type of OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 3V volts.FIFO memory can handle a maximum supply voltage of 3.6V volts.Currently, it has 64 pins.With a frequency of 66.7MHz , it exhibits good accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .
72V801L15PFI Features
FIFOs category
Frequency at most
72V801L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V801L15PFI FIFOs Memory applications.
- Smart Meter
- Multimedia
- Test site
- Firmware loaders
- Desktop Computers
- Networking
- Notebook
- General Data Collection Applications at Extreme High-Temperatures
- Laser Receiver System
- Communications