72V36110L7-5PF8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; ASYNCHRONOUS MODE IS ALSO POSSIBLE |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 40mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Standby Current-Max | 0.015A |
| Memory Density | 4718592 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V36110L7-5PF8 Overview
The TQFP package contains FIFO memory chip.Mounting it in the Surface Mount way is recommended.Supply voltages of 3.3V are capable of achieving high efficiency.FIFO means contains a total of 128 terminations.There are 128 pins for operation.In order for FIFO design to operate, a maximum current of 40mA is required.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.In FIFOs , this gadget is self-contained.It has a OTHER FIFO memory type IC.Low supply voltages, such as 3.15V V, may be required for operation.FIFO memory can handle a maximum supply voltage of 3.45V V.There are a total of 128 pins on this board.There is 133.3MHz FIFO memory IC's maximum value for regular operation.Additionally, RETRANSMIT; AUTO POWER DOWN; ASYNCHRONOUS MODE IS ALSO POSSIBLE can be generated with this FIFO memory.
72V36110L7-5PF8 Features
FIFOs category
Frequency at most
72V36110L7-5PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V36110L7-5PF8 FIFOs Memory applications.
- Multimedia
- Queues for communication systems
- Consumer Systems
- Alarm System
- Cameras
- Smart Meter
- SPI Bus Flash Memory Device
- Networking
- One assembly
- Network bridges