72V263L6PF
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 80 |
| Published | 2003 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V263L6PF Overview
You can find FIFO memory chip in package LQFP .Memory IC's recommended mounted way is Surface Mount .There are 80 pins for operation.FIFO requires a minimum of 35mA current to operate.In order to maximize efficiency, the supply voltage should be set to 3.3V .The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.If the supply voltage is very low, such as 3.15V V, FIFO may be able to operate.FIFO memory is capable of handling a maximum supply voltage of 3.45V volts.Normally, the FIFO memory's maximum value is 166MHz .
72V263L6PF Features
Frequency at most
72V263L6PF Applications
There are a lot of Integrated Device Technology (IDT) 72V263L6PF FIFOs Memory applications.
- Programmable Logic Controller
- Transistors
- Cameras
- Analog-to-digital converters
- High-speed disk
- SPD for DDR3 Memory Modules
- IP Camera Buffer
- Communications
- Buses
- Telecommunication