72V225L15TFI
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V225L15TFI Overview
The TQFP package contains FIFO memory chip.Mounting it Surface Mount is recommended.A supply voltage of 3.3V is capable of producing high efficiency.As a result of this, FIFO means contains 64 terminations.The operation pins are 64 pins.FIFO design requires a maximum current of 30mA to operate.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.It is contained within FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.In some cases, FIFO operates at a very low supply voltage, such as 3V V.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.Approximately 64 pins are attached to it.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.There is 66.7MHz FIFO memory IC's maximum value for regular operation.
72V225L15TFI Features
FIFOs category
Frequency at most
72V225L15TFI Applications
There are a lot of Integrated Device Technology (IDT) 72V225L15TFI FIFOs Memory applications.
- Portable Information Devices
- Tape controllers
- Magnetic memories
- Microprogramming
- Rate buffers
- Data
- Smart Meter
- Buses
- General Data Collection Applications at Extreme High-Temperatures
- Computers