72V225L15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V225L15PFI8 Overview
TQFP is the package in which FIFO memory chip is contained.In this case, it is packaged in case number Tape & Reel .Mounting it in Surface Mount is recommended.A supply voltage of 3.3V allows for high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.There are 64 pins for operation.In order for FIFO design to operate, a maximum current of 30mA is required.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.85°C °C is the memory logic's maximum operating temperature that allows stable operation.In FIFOs , there is a self-contained gadget.A OTHER FIFO memory type IC is used in the part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3V volts.An input voltage of 3.6V V is the maximum that FIFO memory can handle.As a result, it contains a total of 64 pins.When the frequency is set to 66.7MHz it can maintain good accuracy.For regular operation, the memory logic's maximum value is 66.7MHz .
72V225L15PFI8 Features
FIFOs category
Frequency at most
72V225L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V225L15PFI8 FIFOs Memory applications.
- General Data Collection Applications at Extreme High-Temperatures
- Desktop Computers
- Routers
- PC peripheral
- Address mapping
- Transistors
- Look-up Tables
- High-speed disk
- Networking
- Network switching/routing