72V221L20PF8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Max Supply Current | 20mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 1KX9 |
| Standby Current-Max | 0.005A |
| Memory Density | 9216 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V221L20PF8 Overview
The LQFP package contains FIFO memory chip.You'll find it packaged in the shape of a Tape & Reel (TR) .Memory IC's recommended mounted way is Surface Mount .It is possible to achieve high efficiency with a supply voltage of 3.3V .FIFO means contains 32 terminations.There are 32 pins on the operation pins.There is a maximum current requirement of 20mA for its operation.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.It is contained within FIFOs .The IC of the part is OTHER FIFO memory type.FIFO may operate at a very low supply voltage, such as 3V V.The memory logic's maximum supply voltage is 3.6V volts.Currently, it has 32 pins.During normal operation, the FIFO memory's maximum value is 50MHz .
72V221L20PF8 Features
FIFOs category
Frequency at most
72V221L20PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V221L20PF8 FIFOs Memory applications.
- Communications
- Emulators
- Network switching/routing
- Firmware loaders
- Controlled baseline
- Test site
- Data communications
- MP3 Interface for Automobile
- SPD for DDR3 Memory Modules
- Rate buffers