72V215L20PF
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 50MHz |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Direction | Unidirectional |
| Density | 9 kb |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Programmable Flags Support | Yes |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V215L20PF Overview
The TQFP package contains FIFO memory chip.Mounting it in Surface Mount is recommended.64 pin is used for operation.There is a maximum current requirement of 30mA for its operation.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .It operates at 0°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.The FIFO memory chip may be operated at very low supply voltages, such as3V volts.FIFO memory can handle a maximum supply voltage of 3.6V volts.When the frequency is set to 50MHz it can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 50MHz .
72V215L20PF Features
Frequency at most
72V215L20PF Applications
There are a lot of Integrated Device Technology (IDT) 72V215L20PF FIFOs Memory applications.
- Character generators
- Wireless
- Disk Controllers
- Optical memories
- Alarm System
- MP3 Interface for Automobile
- Code converters
- SPI Bus Flash Memory Device
- Buses
- Routers