72V211L15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V211L15PFI8 Overview
You can find FIFO memory chip in package TQFP .In terms of packaging, it comes in Tape & Reel cases.A Surface Mount mounting method is recommended.If the supply voltage is set to 3.3V , high efficiency can be achieved.In FIFO means, there are 32 terminations.These are the 32 pins for operation.FIFO requires a minimum of 20mA current to operate.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.In FIFOs , there is a self-contained gadget.The IC of the part is OTHER FIFO memory type.There is a possibility that FIFO may operate at a very low supply voltage, such as 3V V.FIFO memory can handle a maximum supply voltage of 3.6V volts.There are a total of 32 pins on this FIFO memory IC.When the frequency is set to 66.7MHz , the system can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .
72V211L15PFI8 Features
FIFOs category
Frequency at most
72V211L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V211L15PFI8 FIFOs Memory applications.
- Cardiac Monitoring Device
- SPI Bus Flash Memory Devices
- Character generators
- Data-acquisition systems
- Microprogramming
- Consumer
- Computer Systems
- Disk Controllers
- Computers
- Controlled baseline