7281L15PA8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 125mA |
| Max Supply Current | 125mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 512X9 |
| Density | 9 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7281L15PA8 Overview
FIFO memory chip can be found in the TSSOP package.Surface Mount is memory IC's recommended mounting method.High efficiency is possible with a supply voltage of 5V .56 terminations are contained in FIFO means.FIFO design has 56 operation pins.FIFO requires a minimum of 125mA current to operate.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.It is self-contained in FIFOs .The IC of the part is OTHER FIFO memory type.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V volts.As a result, it contains a total of 56 pins.In normal circumstances, the component has 5V power supplies.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.This FIFO memory IC has a clock frequency of 40MHz .
7281L15PA8 Features
FIFOs category
Clock frequency of 40MHz
7281L15PA8 Applications
There are a lot of Integrated Device Technology (IDT) 7281L15PA8 FIFOs Memory applications.
- Data communications
- Code converters
- Consumer Systems
- General Data Collection Applications at Low-Temperatures
- Extended product-change notification
- Consumer
- Firmware loaders
- Programmable Logic Controller
- One assembly
- Alarm System