72615L25PF
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 230mA |
| Max Supply Current | 230mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 512X18 |
| Density | 18 kb |
| Standby Current-Max | 0.23A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72615L25PF Overview
FIFO memory chip is contained in the TQFP package.It is pointing in the direction of Surface Mount .When the supply voltage is 5V , high efficiency is possible.FIFO consists of 64 terminations, which indicates that FIFO means is empty.Operation pins are 64 .For its operation, 230mA is the maximum current required.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.A self-contained gadget is contained within FIFOs .It has a BI-DIRECTIONAL FIFO memory type IC.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.A total of 64 pins are present on the FIFO memory IC.When the frequency is set to 40MHz it can maintain good accuracy.During regular operation, the FIFO memory's maximum value is 40MHz .There are normally 5V power supplies attached to the component.It is also possible to generate BYPASS REGISTER using this FIFO memory.
72615L25PF Features
FIFOs category
Frequency at most
72615L25PF Applications
There are a lot of Integrated Device Technology (IDT) 72615L25PF FIFOs Memory applications.
- Consumer Systems
- Look-up Tables
- Network switching/routing
- General Data Collection Applications at Low-Temperatures
- Video Processing
- High-speed graphics pixel buffer
- Video
- TVs
- Analog-to-digital converters
- Multi-stage synchronizer