723651L15PQF
| Parameters | |
|---|---|
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 132 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 400μA |
| Max Supply Current | 400μA |
| Frequency (Max) | 66.7MHz |
| Access Time | 11 ns |
| Data Bus Width | 36b |
| Organization | 2KX36 |
| Density | 72 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 4.57mm |
| Length | 24.13mm |
| Width | 24.13mm |
| Thickness | 3.55mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 132 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX; RETRANSMIT |
| HTS Code | 8542.32.00.71 |
723651L15PQF Overview
This package is included in PQFP .The recommended mounting way is Surface Mount .High efficiency is possible with a supply voltage of 5V .In FIFO means, there are 132 terminations.As far as the operation pins are concerned, they are 132 pins.FIFO requires a minimum of 400μA current to operate.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.Its maximum operating temperature of 70°C °C ensures stable operation.A self-contained gadget is contained in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.As a result, it contains a total of 132 pins.When the frequency is set to 66.7MHz , the system can maintain good accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .Normally, the component owns 5V power supplies.It is also possible to generate MAIL BOX; RETRANSMIT with the use of this FIFO memory.
723651L15PQF Features
FIFOs category
Frequency at most
723651L15PQF Applications
There are a lot of Integrated Device Technology (IDT) 723651L15PQF FIFOs Memory applications.
- Rate buffers
- Event Recorder
- IP Radio
- Thermal Management for DDR3 Memory Modules
- Transistors
- Address mapping
- Video Processing
- Multi-stage synchronizer
- Switches
- Signal processing