72205LB25J8
| Parameters | |
|---|---|
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 40MHz |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Density | 4.5 kb |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 2000 |
| Part Status | Active |
72205LB25J8 Overview
FIFO memory chip can be found in the PLCC package.The recommended mounting way is Surface Mount .68 pins are the operation pins.FIFO requires a minimum of 60mA current to operate.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.Keeping the temperature at 0°C degrees Celsius ensures its reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.FIFO may operate at very low supply voltages, such as 4.5V volts.The memory logic's maximum supply voltage is 5.5V volts.Despite a frequency of 40MHz , it is capable of maintaining good accuracy.The memory logic's maximum value is 40MHz for regular operation.
72205LB25J8 Features
Frequency at most
72205LB25J8 Applications
There are a lot of Integrated Device Technology (IDT) 72205LB25J8 FIFOs Memory applications.
- Consumer
- Programmable Logic Controller
- Down-Hole Energy Drilling
- Extended product-change notification
- Buses
- GPS Offender Tracking
- Medical Monitoring Device
- Look-up Tables
- Firmware loaders
- Multi-stage synchronizer