7203L15J8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7203L15J8 Overview
PLCC is the package in which FIFO memory chip is contained.Surface Mount is memory IC's recommended mounting method.With a supply voltage of 5V volts, high efficiency is possible.FIFO means contains 32 terminations.In the case of the operation pins, they are 32 pins.FIFO design requires a maximum current of 120mA to operate.In order to maximize efficiency, the supply voltage should be set to 5V .This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.In FIFOs , this gadget is self-contained.It has a type OTHER FIFO memory IC.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.The FIFO memory IC is equipped with a total of 32 pins.Components normally possess 5V power supplies.This gadget can also be used to generate RETRANSMIT .The FIFO memory IC is controlled by a clock with a frequency of 40MHz .
7203L15J8 Features
FIFOs category
Clock frequency of 40MHz
7203L15J8 Applications
There are a lot of Integrated Device Technology (IDT) 7203L15J8 FIFOs Memory applications.
- Laser Receiver System
- SPD for DDR3 Memory Modules
- Game Consoles
- Signal processing
- One assembly
- Consumer Systems
- Seismic Data Collection at Extreme Temperatures
- Analog-to-digital converters
- IP Radio
- Character generators