7201LA15J
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
7201LA15J Overview
FIFO memory chip is included in the PLCC package.Mounting it in Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.32 terminations are contained in FIFO means.The operation pins are 32 pins.In order for FIFO design to operate, a maximum current of 80mA is required.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.70°C °C is the memory logic's maximum operating temperature that allows stable operation.This gadget is self-contained in?FIFOs .It has a type OTHER FIFO memory IC.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.There are a total of 32 pins on this board.It is normal for a component to be equipped with 5V power supplies.With the help of this FIFO memory, RETRANSMIT can also be generated.The FIFO memory IC runs at a frequency of 40MHz .
7201LA15J Features
FIFOs category
Clock frequency of 40MHz
7201LA15J Applications
There are a lot of Integrated Device Technology (IDT) 7201LA15J FIFOs Memory applications.
- Data-acquisition systems
- Consumer
- Event Recorder
- General Data Collection Applications at Low-Temperatures
- PC peripheral
- SPI Bus Flash Memory Device
- High-speed disk
- Firmware loaders
- IP Camera Buffer
- High-speed graphics pixel buffer