5M160ZE64C5N
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Package / Case | QFP |
| Number of Pins | 64 |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Frequency | 118.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 25μA |
| Number of I/O | 54 |
| Nominal Supply Current | 25μA |
| Memory Type | FLASH |
| Propagation Delay | 7.5 ns |
| Frequency (Max) | 152MHz |
| Number of Programmable I/O | 54 |
| Number of Logic Blocks (LABs) | 160 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
5M160ZE64C5N Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).You can find it in package [0].The device is programmed with 54 I/O ports.There are 64 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of QUADand is connected to the ground.There is 1.8V voltage supply for this device.There is a part included in Programmable Logic Devices.It is equipped with 64 pin count.Additionally, this device is capable of displaying [0].If high efficiency is desired, the supply voltage should be kept at [0].FLASH is adopted for storing data.Surface Mountis the mounting point of this electronic part.The pins are [0].A voltage of 1.89V is the maximum supply voltage for this device.The device is designed to operate with a minimal supply voltage of 1.71VV.Programmable I/Os are counted up 54.You can achieve 118.3MHzfrequencies.There should be a temperature above 0°Cat the time of operation.It is recommended that the operating temperature be lower than 85°C.It is composed of 160 logic blocks (LABs).Maximum frequency should be less than 152MHz.It is possible to store data and programs in the devices' 1kBmemory.
5M160ZE64C5N Features
QFP package
54 I/Os
64 pin count
64 pins
160 logic blocks (LABs)
5M160ZE64C5N Applications
There are a lot of Altera 5M160ZE64C5N CPLDs applications.
- Custom shift registers
- D/T registers and latches
- Bootloaders for FPGAs
- Discrete logic functions
- Software-Driven Hardware Configuration
- Address decoding
- Storage Cards and Storage Racks
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Power Meter SMPS
- I/O PORTS (MCU MODULE)