5962-9952201QYA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | CLCC |
| Number of Pins | 84 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 84 |
| ECCN Code | 3A001.A.2.C |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 83MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 84 |
| Qualification Status | Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 69 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Frequency (Max) | 83MHz |
| Organization | 1 DEDICATED INPUTS, 69 I/O |
| Programmable Logic Type | EE PLD |
| Number of Logic Blocks (LABs) | 8 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 1 |
| In-System Programmable | YES |
| Length | 29.21mm |
| Width | 29.21mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
5962-9952201QYA Overview
The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The product is contained in a CLCC package.The device is programmed with 69 I/O ports.It is programmed that device terminations will be 84 .QUADis the terminal position of this electrical part.A voltage of 3.3V is used as the power supply for this device.It is a part of family [0].In this chip, the 84pins are programmed.The device can also be used to find [0].For high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].Surface Mountmounts this electronic component.The pins are [0].It operates at a maximum supply voltage of 3.6V volts.Initially, it requires a voltage of 3Vas the minimum supply voltage.You can achieve 83MHzfrequencies.It is recommended that the operating temperature be greater than -55°C.It is recommended that the operating temperature be lower than 125°C.Its basic building block is composed of 8 logic blocks (LABs).The input signals are detected by 1dedicated inputs.It should be below 83MHzat the maximal frequency.This kind of FPGA is composed of EE PLD.
5962-9952201QYA Features
CLCC package
69 I/Os
84 pin count
84 pins
8 logic blocks (LABs)
5962-9952201QYA Applications
There are a lot of Cypress Semiconductor 5962-9952201QYA CPLDs applications.
- I2C BUS INTERFACE
- Wide Vin Industrial low power SMPS
- Page register
- Preset swapping
- INTERRUPT SYSTEM
- State machine control
- DDC INTERFACE
- Power automation
- Synchronous or asynchronous mode
- PULSE WIDTH MODULATION (PWM)