Parameters |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Contact Plating |
Lead, Tin |
Mount |
Through Hole |
Package / Case |
CDIP |
Number of Pins |
24 |
Packaging |
Rail/Tube |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-55°C |
Subcategory |
DSP Peripherals |
Technology |
CMOS |
Terminal Position |
DUAL |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Pin Count |
24 |
Number of Outputs |
8 |
Qualification Status |
Qualified |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
MILITARY |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
uPs/uCs/Peripheral ICs Type |
DSP PERIPHERAL, PIPELINE REGISTER |
Clock Frequency |
6.25MHz |
Propagation Delay |
8 ns |
Boundary Scan |
NO |
Low Power Mode |
YES |
High Level Output Current |
-12mA |
Low Level Output Current |
32mA |
Clock Edge Trigger Type |
Positive Edge |
Height |
5.08mm |
Length |
32mm |
Width |
6.92mm |
Thickness |
4.7mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
5962-9220502MLA Overview
This device can be found embedded within the package CDIP. 24 is the number of terminations on the chip. A Rail/Tube case holds it. Its operating supply voltage is rated at 5V. This part has 1 elements. Devices with 24 pins are available. Using Through Hole as a mount point is recommended. As noted, this chip operates within the range of 5V. The device is capable of delivering voltage at 5V. It has a total of zero pins. At temperatures below 125°C, it is recommended for use. It should not be lower than -55°C to operate this device. Under 5.5V, this voltage is employed. This supply voltage is employed higher than 4.5V. It belongs to the DSP Peripherals subcategory. It is equipped with 8 outputs.
5962-9220502MLA Features
With 24 pins
Operate supply voltage at 5V
It supplies 5V power
5962-9220502MLA Applications
There are a lot of Texas Instruments 5962-9220502MLA Shift Registers applications.
- Serial to parallel converter
- Sequence generator
- Flash Memory
- Remote control holding register
- Pattern Recognizers
- Data Processors
- Delay Line
- data manipulation
- Counter
- Data Format Converters