5962-8416201VCA
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 14 |
| Packaging | Rail/Tube |
| Number of Terminations | 14 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | AND-GATED SERIAL INPUTS (A AND B) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 295 ns |
| Turn On Delay Time | 295 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Max I(ol) | 0.0052 A |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| fmax-Min | 25 MHz |
| Height | 5.08mm |
| Length | 19.56mm |
| Width | 6.67mm |
| Thickness | 4.57mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
5962-8416201VCA Overview
In package CDIP, there is an embedded device. Taking the total number of terminations on the chip and adding them up, we get 14. A Rail/Tube case holds it. 5V is the operating supply voltage of the part. 1 elements are present in this part. In this device, there are 14 pins. As a general recommendation, mounting by Through Hole is recommended. An electronic component is included in the HC/UH. It is noted that the operating supply voltage of this chip falls within the range 5V. There are also the following additional considerations in this section: AND-GATED SERIAL INPUTS (A AND B). A total of 8 bits are present on an IC chip. 14 pins are on it. It is recommended that it be used at temperatures below 125°C. For this device to work, it should not go below -55°C. We use this supply voltage under 6V. The supply voltage is higher than 2V.
5962-8416201VCA Features
With 14 pins
Operate supply voltage at 5V
5962-8416201VCA Applications
There are a lot of Texas Instruments 5962-8416201VCA Shift Registers applications.
- ROM Chips
- Pattern Recognizers
- Serial to parallel converter
- Interconnectors
- Dual-rank shift, hold, and bus applications
- 7-segment display control
- Counter
- 8-bit data storage
- Data manipulation
- Pulse Extenders