54FCT574CTDB
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 6.2 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 6.2 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.032 A |
| High Level Output Current | -12mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.9mm |
| Length | 25.4mm |
| Width | 7.62mm |
| Thickness | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
54FCT574CTDB Overview
The package is in the form of CDIP. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is powered by a voltage of 5V . In this case, the D flip flop belongs to the FCTfamily. A part of the electronic system is mounted in the way of Through Hole. Basically, it is designed with a set of 20 pins. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. The design is based on 8bits. The system runs on a power supply of 5V watts. The flip flop contains 2ports. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. In terms of quiescent current, it consumes 10μA . It is also characterized by BROADSIDE VERSION OF 374. A high level output current of -12mAis set. 32mA is the low level output current. Temperatures below 125°Care ideal for operating. It is recommended that the operating temperature be greater than -55°C. Initially, it requires a voltage of 4.5V as the minimum supply voltage. It supports the maximal supply voltage of 5.5V. The logic IC it uses is BUS DRIVER. It is equipped with 1 Functions . This device is equipped with a pin count of 20.
54FCT574CTDB Features
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count
54FCT574CTDB Applications
There are a lot of Integrated Device Technology (IDT) 54FCT574CTDB Flip Flops applications.
- Bus hold
- Functionally equivalent to the MC10/100EL29
- ESCC
- High Performance Logic for test systems
- Computers
- Balanced 24 mA output drivers
- Shift Registers
- Test & Measurement
- Bounce elimination switch
- Data transfer