100331
| Parameters | |
|---|---|
| Surface Mount | YES |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | WITH ADDITIONAL COMMON CLOCK; SET AND RESET INPUTS |
| HTS Code | 8542.39.00.01 |
| Subcategory | FF/Latches |
| Technology | ECL |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 3 |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 28 |
| JESD-30 Code | S-PQCC-J28 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Power Supplies | -4.5V |
| Temperature Grade | OTHER |
| Number of Bits | 1 |
| Family | 100K |
| Output Characteristics | OPEN-EMITTER |
| Output Polarity | COMPLEMENTARY |
| Logic IC Type | D FLIP-FLOP |
| Prop. Delay@Nom-Sup | 1.8 ns |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 1.8 ns |
| Power Supply Current-Max (ICC) | 122mA |
| fmax-Min | 400 MHz |
| Max Frequency@Nom-Sup | 400000000Hz |
| Height Seated (Max) | 4.57mm |
| Length | 11.43mm |
| Width | 11.43mm |
| RoHS Status | Non-RoHS Compliant |
100331 Overview
It is configured with a trigger that uses a value of POSITIVE EDGE. A total of 28terminations have been recorded. It belongs to the family of electronic devices known as 100K. The part is included in FF/Latches. This flip flop is designed with 1 Bits. In order for the device to operate, it requires -4.5V power supplies. In addition, WITH ADDITIONAL COMMON CLOCK; SET AND RESET INPUTSis a characteristic of it. It uses D FLIP-FLOPas its logic IC. As a result, it is equipped with 3 functions . The D latch is equipped with 28 pins.
100331 Features
1 Bits
-4.5V power supplies
3 Functions
28 pin count
100331 Applications
There are a lot of Fairchild (ON Semiconductor) 100331 Flip Flops applications.
- Latch
- Bounce elimination switch
- Convert a momentary switch to a toggle switch
- Communications
- Frequency division
- Power down protection
- Bus hold
- Balanced 24 mA output drivers
- Individual Asynchronous Resets
- Frequency Divider circuits