ZXMS6005DGTA
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Weight | 7.994566mg |
| Transistor Element Material | SILICON |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q101, INTELLIFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 150mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | LOGIC LEVEL COMPATIBLE |
| Max Power Dissipation | 3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Number of Elements | 1 |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Power Dissipation | 1.3W |
| Voltage - Supply (Vcc/Vdd) | 3.3V 5V |
| Case Connection | DRAIN |
| Input Type | Non-Inverting |
| Turn On Delay Time | 6 μs |
| Switch Type | General Purpose |
| Transistor Application | SWITCHING |
| Output Current per Channel | 2A |
| Rise Time | 14μs |
| Drain to Source Voltage (Vdss) | 60V |
| Fall Time (Typ) | 19 μs |
| Turn-Off Delay Time | 34 μs |
| Continuous Drain Current (ID) | 1.6A |
| Threshold Voltage | 700mV |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 5V |
| Voltage - Load | 60V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Pulsed Drain Current-Max (IDM) | 6A |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Rds On (Typ) | 150m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Drain to Source Resistance | 150mOhm |
| Nominal Vgs | 1 V |
| Ambient Temperature Range High | 125°C |
| Height | 1.8mm |
| Length | 6.55mm |
| Width | 3.55mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 17 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
ZXMS6005DGTA Overview
The LED driver's packaged as a Tape & Reel (TR).Package TO-261-4, TO-261AA contains it.It has been mounted as Surface Mount on the LED driver.It owns the General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~125°C TA.The LED driver has 1 outputs.The LED driving board operates at 3.3V 5V volts.It produces a maximum output voltage of N-Channel volts at its maximum output.It is equipped with Auto Restart features.It contains 4 terminations.For operation, 4 pins are used.This results in the maximum output current dropping to 2A to meet the operation criteria.Surface Mount is mounted in the way.This LED driver is equipped with a total of 4 pins.Lighting drivers with 150mOhm resistance are used.This electrical component is included in the Automotive, AEC-Q101, INTELLIFET? series.The LED driver can also be used to produce LOGIC LEVEL COMPATIBLE.As a whole, there are 1 elements.The LED driver has SWITCHING transistor applications.
ZXMS6005DGTA Features
Resistance of 150mOhm
Additional features like LOGIC LEVEL COMPATIBLE
Transistor applications such as SWITCHING
ZXMS6005DGTA Applications
There are a lot of Diodes Incorporated ZXMS6005DGTA Power Switches ICs applications.
- Hot Swap
- USB Ports/Hubs
- Portable/Handheld Devices
- Smartphone and PDA
- Wireless/Networking Cards
- Portable GPS
- USB Power Distribution
- Wireless Modem Data Cards
- Hot Swaps
- Set-top-box