Z8523320FSC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LQFP |
| Number of Pins | 44 |
| Packaging | Tray |
| Published | 1995 |
| Series | EMSCC™ |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | Z85233 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 20MHz |
| Supply Current-Max | 12mA |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 1 |
| Data Transfer Rate-Max | 0.625 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 2.5mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z8523320FSC Overview
It's a good fit for the 44-LQFP package.It is packaged in a Tray case.This component is installed in the way of Surface Mount.There is the potential for the device to supply 4.5V~5.5V volts.By using the [0], it is possible to find parts that are related.The terminations on it are [0].Be sure to set the device to 5V.A total of 44pins are located on it.In order to operate, the 44pins are used.It is mounted on Surface Mount.The device must operate at a minimum working temperature of 0°Cin order to be reliable.In addition to ensuring the consistency of the part, 70°Cis the maximum value possible.Electronic components of the Other Microprocessor ICsfamily are used.It incorporates SERIAL IO/COMMUNICATION CONTROLLER, SERIALUPS/UCS/Peripheral ICs.The electronic part in question belongs to the EMSCC? series.It is capable of delivering voltage at 5V degrees Celsius.MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO can also be founded when using this device.Ideally, its output frequency should not exceed 20MHz.In the interface IC, there are 1 serial I/Os.
Z8523320FSC Features
It is based on Z85233.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 1
Z8523320FSC Applications
There are a lot of Zilog Z8523320FSC Specialized Interface ICs applications.
- SDH/SONET multiplexers
- Battery Powered Instruments
- AD7840/8, AD7870/1/2/4/5/6/8
- SONET/SDH ADM
- CSU/DSUs
- Avionics test equipment
- Automatic test equipment
- ATM and Frame Relay Equipment
- Audio signal routing
- Precision test equipment