Z84C4108PEC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | DIP |
| Number of Pins | 40 |
| Supplier Device Package | 40-PDIP |
| Published | 2002 |
| Series | Z80 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Applications | I/O Controller |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | Z84C41 |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Voltage | 5V |
| Memory Size | 2MB |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Supply Current-Max | 12mA |
| Access Time | 8 μs |
| Data Bus Width | 8b |
| Address Bus Width | 1 |
| Core Architecture | Z8 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ |
| Height Seated (Max) | 4.75mm |
| Length | 52.325mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z84C4108PEC Overview
The DIPpackage is a good fit for it.Through Holeis used to install this component.I/O Controlleris appropriate for this component.Using the Z84C41can help you find related parts.A total of 40terminations have been recorded.You should set this device to 5V.The device has a total of 40pins.In order for the operation to be performed, the 40pins must be connected.It is mounted by Through Hole.A minimum working temperature of -40°Cis required to ensure the reliability of the unit.When 100°Cis the maximum value, the part will run consistently.The electronic components is from Other Microprocessor ICs family.ICs used in interfaces are operated at a supply voltage of 5V.Devices containing uPs, uCs, and peripheral ICs are listed as SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.The electronic part in question belongs to the Z80 series.It is capable of delivering voltage at 5V degrees Celsius.When operating at a frequency of [0], it is capable of achieving good performance.The interface IC has 2serial I/O ports.It is possible for the component to supply a voltage of [0].
Z84C4108PEC Features
It is based on Z84C41.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Run frequency at 8MHz
Number of Serial I/Os : 2
Z84C4108PEC Applications
There are a lot of Zilog Z84C4108PEC Specialized Interface ICs applications.
- Switching Systems
- Residential Gateways, Home Gateway/Router
- Microprocessor controlled systems
- E1 Network Equipment
- Modems
- and 5 REN loads
- CSU/DSUs
- Precision test equipment
- ?Cable Telephony – NIU, Set-Top Box, Home Side Box,
- Relay Replacement