VNN7NV0413TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Voltage - Rated DC | 40V |
| Max Power Dissipation | 7W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Current Rating | 6A |
| Base Part Number | VNN7NV |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Interface | On/Off |
| Element Configuration | Single |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 7W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 300 ns |
| Switch Type | General Purpose |
| Rise Time | 470ns |
| Fall Time (Typ) | 350 ns |
| Turn-Off Delay Time | 1.5 μs |
| Continuous Drain Current (ID) | 6A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Turn On Time | 2.3 µs |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Drain to Source Resistance | 60mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
VNN7NV0413TR Overview
The package is in the form of a Tape & Reel (TR).It's included in the TO-261-4, TO-261AA package.The lighting driver is mounted in the Surface Mount position.There is a General Purpose switch type associated with it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.The LED driving board is powered by a voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.It belongs to the family VNN7NV.It has a total of 4 terminations.The 4 pins are used to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.The maximum output current must drop to 6A to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.There are 4 pins in total on this board.The OMNIFET II?, VIPower? series includes this electrical component.This case has the output current set to 6A.
VNN7NV0413TR Features
VNN7NV0413TR Applications
There are a lot of STMicroelectronics VNN7NV0413TR Power Switches ICs applications.
- Notebook PC
- Telecom and Network Systems
- Portable/Handheld Devices
- Various applications equipped with buttons
- Wearable Devices
- Portable Music Players
- Hot Swap
- Wireless/Networking Cards
- PDAs
- Hot Swap