VNN1NV0413TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Voltage - Rated DC | 40V |
| Max Power Dissipation | 7W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Current Rating | 1.7A |
| Base Part Number | VNN1NV |
| Pin Count | 4 |
| JESD-30 Code | R-PDSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.7A |
| Operating Supply Voltage | 6.8V |
| Interface | On/Off |
| Element Configuration | Single |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 7W |
| Output Current | 1.7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 200 ns |
| Switch Type | General Purpose |
| Rise Time | 170ns |
| Fall Time (Typ) | 200 ns |
| Turn-Off Delay Time | 1 μs |
| Continuous Drain Current (ID) | 1.7A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Output Peak Current Limit-Nom | 1.7A |
| Rds On (Typ) | 250m Ω (Max) |
| Drain to Source Resistance | 250mOhm |
| Turn Off Time | 5.5 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
VNN1NV0413TR Overview
It is packaged in the manner of a Tape & Reel (TR).In the TO-261-4, TO-261AA package, it is included.The mounting type of the LED driver is Surface Mount.A General Purpose switch type is owned by it.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.By default, it is set to output 1.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage of this LED driver is N-Channel volts.The VNN1NV family contains this object.A total of 4 terminations have been recorded.During operation, the 3 pins are used.It consists of 1 functions.This operation requires the maximum output current to be decreased to 1.7A.The LED driving board is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 4 pins.This electrical component can be found in the OMNIFET II?, VIPower? series.When this case is used, the output current is set to 1.7A.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.In order to achieve the best efficiency, the supply voltage should be set to 6.8V.
VNN1NV0413TR Features
VNN1NV0413TR Applications
There are a lot of STMicroelectronics VNN1NV0413TR Power Switches ICs applications.
- HDD and SSD
- HDD, SSD
- Smart Phones, Feature Phones
- Wearable Devices
- Portable GPS
- Portable Music Players
- Telecom and Network Systems
- Hot-Swap Systems
- Wireless/Networking Cards
- Set-Top Boxes