VNI2140JTR
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VNI2140 |
| Pin Count | 12 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 9/36V |
| Supply Voltage-Min (Vsup) | 9V |
| Interface | On/Off |
| Nominal Supply Current | 1.9mA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 9V~45V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | TRANSIENT; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 14 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-12 |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
VNI2140JTR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The PowerSSO-12 package contains it.The lighting driver is mounted in the Surface Mount position.General Purpose is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.It is possible to use 2 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.It comes under the family of VNI2140.It contains 12 terminations.For operation, 12 pins are used.It consists of 1 functions.To meet the operation criteria, the maximum output current drops to 500mA.Supply voltages of 24V allow for high efficiency.As a result, it is mounted in the manner of Surface Mount.A total of 12 pins are present on it.In this case, the output current is set to 500mA.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The LED driver is configured with a maximum supply voltage of 36V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 9V.This part has a power supply of 9/36V volts.
VNI2140JTR Features
Supplied from 24V
VNI2140JTR Applications
There are a lot of STMicroelectronics VNI2140JTR Power Switches ICs applications.
- Hot Swap
- USB Power Distribution
- PDAs
- Hard Disk Drives
- Hot Swaps
- Smart Phones, Feature Phones
- Wearable Devices
- Portable Video Game Players
- Wireless Modem Data Cards
- Solid State Drivers