VND7NV04
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Weight | 329.988449mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Voltage - Rated DC | 40V |
| Max Power Dissipation | 60W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Current Rating | 6A |
| Base Part Number | VND7N |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 60W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Drain to Source Voltage (Vdss) | 42V |
| Continuous Drain Current (ID) | 13A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Drain to Source Resistance | 60mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
VND7NV04 Overview
The package is in the form of a Tube.The TO-252-3, DPak (2 Leads + Tab), SC-63 package includes it.The LED driver is mounted as Surface Mount.This switch is of type General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.The lighting driver has a total of 1 outputs that are available for use.The LED driving board is powered by a voltage of Not Required.The maximum output voltage is N-Channel volts.It comes under the family of VND7N.The termination count is 2.It is necessary to use the 3 pins in order to operate the LED driver.Currently, the lighting driver has a total of 1 functions.Maximum output current falls to 6A when operation criteria are met.The LED driving board is mounted in the way of Surface Mount.This LED driver is equipped with a total of 4 pins.The LED driver has 60mOhm resistance.A component of this type is included in the OMNIFET II?, VIPower? series.As a result, the output current is set to 6A.For its operation, a maximum current requirement of 100μA is required.
VND7NV04 Features
Resistance of 60mOhm
VND7NV04 Applications
There are a lot of STMicroelectronics VND7NV04 Power Switches ICs applications.
- Various applications equipped with buttons
- Set-Top Boxes
- USB Protection
- Wireless Headsets
- Hard Disk Drives
- Hot Swap
- Hot Swap
- Wearable Devices
- Solid State Drivers
- Wireless/Networking Cards