VND7N04TR-E
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 60W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND7N |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 60W |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 18V |
| Continuous Drain Current (ID) | 7A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 31V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Turn On Time | 0.5 µs |
| Output Peak Current Limit-Nom | 7A |
| Rds On (Typ) | 140m Ω (Max) |
| Drain to Source Resistance | 140mOhm |
| Turn Off Time | 7 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 2.4mm |
| Length | 6.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND7N04TR-E Overview
The package is in the form of a Tape & Reel (TR).There is a package for it in the TO-252-3, DPak (2 Leads + Tab), SC-63 package.It has been mounted as Surface Mount on the LED driver.The switch type is General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.The LED driving board operates at Not Required volts.It has a maximum output voltage of N-Channel volts.It is a member of the VND7N family.It contains 2 terminations.The 3 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.This operation requires the maximum output current to be decreased to 9A.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 3 pins.In this case, there is 60mOhm resistance in the LED driving board.It is part of the OMNIFET II?, VIPower? series.It is set to 4A in this case.
VND7N04TR-E Features
Resistance of 60mOhm
VND7N04TR-E Applications
There are a lot of STMicroelectronics VND7N04TR-E Power Switches ICs applications.
- USB Power Distribution
- Various applications equipped with buttons
- Hot Swap
- Notebook PC
- Hot Swap
- Solid-State Drives
- Wearable Devices
- USB3.1 Power Delivery
- Portable Music Players
- USB Ports/Hubs