VND670SP
| Parameters | |
|---|---|
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 150 µs |
| Output Peak Current Limit-Nom | 45A |
| Rds On (Typ) | 26m Ω |
| Turn Off Time | 135 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | PWM Input |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VND670 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 30A |
| Operating Supply Voltage | 40V |
| Power Supplies | 9/18V |
| Interface | On/Off |
| Nominal Supply Current | 40mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
VND670SP Overview
As you can see, it's packaged in the way of a Tube.There is a package for it in the PowerSO-10 Exposed Bottom Pad package.A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.There are 2 outputs available on this lighting driver.A supply voltage of Not Required is required for it to operate.It has a total of PWM Input features.I believe it belongs to the VND670 family.There are 10 terminations in it.The 10 pins are used to operate the LED driver.The LED driver has 1 functions.This results in the maximum output current dropping to 30A to meet the operation criteria.A supply voltage of 13V leads to high efficiency.10 pins are equipped with it.A container with a capacity of MOSFET Drivers contains this self-contained lighting driver.This part is powered by 9/18V.In order to maximize efficiency, the supply voltage should be set at 40V.
VND670SP Features
Supplied from 13V
VND670SP Applications
There are a lot of STMicroelectronics VND670SP Power Switches ICs applications.
- USB3.1 Power Delivery
- Mobile Communication Devices
- Handheld Devices
- HDD, SSD
- Wireless Headsets
- Wireless/Networking Cards
- Wearable Devices
- Wireless Modem Data Cards
- USB Ports/Hubs
- Portable/Handheld Devices