VND600SP-E
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 30mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 96.1W |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Base Part Number | VND600 |
| Pin Count | 10 |
| Output Type | N-Channel |
| Max Output Current | 40A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Interface | On/Off |
| Element Configuration | Dual |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Power Dissipation | 96.1W |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Number of Drivers | 2 |
| Rds On (Typ) | 30m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 3.65mm |
| Length | 7.6mm |
| Width | 9.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND600SP-E Overview
It's?packaged?in?the way?of?a?Tube.Package PowerSO-10 Exposed Bottom Pad contains it.It has been mounted as Surface Mount on the LED driver.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.The VND600 family consists of this type.As a result, there are 10 terminations.It is necessary to use the 10 pins in order to operate the LED driver.It has 2 functions.This results in the maximum output current dropping to 40A to meet the operation criteria.Using a voltage of 13V allows for high efficiency.The lighting driver is mounted in the direction of Surface Mount.10 pins are connected to it in total.It has a resistance of 30mOhm.This results in a 25A output current.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.This LED driver is configured to have a maximum supply voltage of 36V (Vsup).A supply voltage of 13V is recommended for maximum efficiency.It has 2 drivers.
VND600SP-E Features
Supplied from 13V
Resistance of 30mOhm
VND600SP-E Applications
There are a lot of STMicroelectronics VND600SP-E Power Switches ICs applications.
- Set-top-box
- Wireless Modem Data Cards
- Wearable Devices
- Portable Video Game Players
- Wireless/Networking Cards
- Set-Top Boxes
- Gaming
- HDD and SSD
- Portable GPS
- Portable GPS Device