VND5E050AJTR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-PowerLSOP (0.154, 3.90mm Width) |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VND5E050 |
| Pin Count | 12 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 27A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 19A |
| Turn-Off Delay Time | 45 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5E050AJTR-E Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a package for it in the 12-PowerLSOP (0.154, 3.90mm Width) package.The LED driver is mounted as Surface Mount.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.There is a default setting of 2 for output.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.In terms of features, the LED driving board has Auto Restart.It belongs to the family VND5E050.It has a total of 12 terminations.During operation, the 12 pins are used.The LED driving board has a total of 1 functions.As a result, the maximum output current is reduced to 27A in order to meet the operation requirements.It is possible to obtain high efficiency with a supply voltage of 13V.Surface Mount is mounted in the way of this lighting driver.The LED driving board is equipped with a total of 12 pins.50mOhm is the resistance of the lighting driver.This electrical component can be found in the VIPower? series.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.In order to achieve the best efficiency, the supply voltage should be set to 13V.It requires 6mA current to operate.
VND5E050AJTR-E Features
Supplied from 13V
Resistance of 50mOhm
VND5E050AJTR-E Applications
There are a lot of STMicroelectronics VND5E050AJTR-E Power Switches ICs applications.
- PC Cards
- Portable GPS Device
- Wireless Headsets
- HDD, SSD
- Gaming
- Wireless/Networking Cards
- Telecom and Network Systems
- Storage Drives
- USB Ports/Hubs
- Solid-State Drives