VND5160AJ-E
| Parameters | |
|---|---|
| Factory Lead Time | 42 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-12 |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VND5160 |
| Pin Count | 12 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Current - Output (Max) | 3.8A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 3.5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 10 μs |
| Rds On (Typ) | 160m Ω (Max) |
| Turn Off Time | 15 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5160AJ-E Overview
The LED driver's packaged as a Tube.It is included with the PowerSSO-12 package as well.The lighting driver is mounted in the Surface Mount position.It owns the General Purpose switch type.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.As a default, the output is set to 2.The LED driving board is powered by a voltage of Not Required.The maximum output voltage is N-Channel volts.Features of the lighting driver are Auto Restart.This object belongs to the VND5160 family.It contains 12 terminations.During operation, the 12 pins are used.The LED driver has 1 functions.In terms of output, the lighting driver can provide a maximum of 3.8A V.This operation requires the maximum output current to be decreased to 5A.With a supply voltage of 13V, high efficiency is possible.The lighting driver is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 12 pins.The LED driver has 160mOhm resistance.It belongs to the VIPower? series.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.The Vsup value (maximum supply voltage) is set to 36V.Normal operation requires Vsup above 4.5V.In this case, the power supply is 8/36V.
VND5160AJ-E Features
Supplied from 13V
Resistance of 160mOhm
VND5160AJ-E Applications
There are a lot of STMicroelectronics VND5160AJ-E Power Switches ICs applications.
- Portable Music Players
- Low Voltage I/O System Power
- PC Card Hot Swap
- Smartphone and PDA
- Portable Video Game Players
- Hard Disk Drives
- Hot Swap
- USB Power Distribution
- Hot Swap
- PDAs