VND5012AKTR-E
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 18 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 12mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VND5012 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 40A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Output Current | 40A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 15 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 42A |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 12m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND5012AKTR-E Overview
The package is in the form of a Tape & Reel (TR).This file is included in package 24-PowerBSOP (0.295, 7.50mm Width).The lighting driver has the mounting type Surface Mount.The switch type of this switch is General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has 2 outputs.A supply voltage of Not Required is required for it to operate.The maximum output voltage is N-Channel volts.As far as features are concerned, the LED driving board has Auto Restart.It is a member of the VND5012 family.It contains 24 terminations.24 pins are used for operation.It is important to note that the LED driving board has 2 functions.This operation requires the maximum output current to be decreased to 40A.It is possible to obtain high efficiency with a supply voltage of 13V.In this case, it is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 24 pins.12mOhm is the resistance of the lighting driver.These electrical components are part of the VIPower? series.As a result, the output current is set to 40A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.This LED driver is configured to have a maximum supply voltage of 36V (Vsup).A 8/36V power supply is used by the part.It is recommended to set the supply voltage to 13V for optimum efficiency.6mA is the maximum current required to operate it.
VND5012AKTR-E Features
Supplied from 13V
Resistance of 12mOhm
VND5012AKTR-E Applications
There are a lot of STMicroelectronics VND5012AKTR-E Power Switches ICs applications.
- PDAs
- PC Cards
- Storage Drives
- Hot Swap
- Various applications equipped with buttons
- HDD, SSD
- USB3.1 Power Delivery
- Set-Top Boxes
- Hot Swaps
- Hot-Swap Systems