VND3NV04-E
| Parameters | |
|---|---|
| Factory Lead Time | 20 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 35W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.28mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND3N |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 35W |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 3.5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 120m Ω (Max) |
| Drain to Source Resistance | 120mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND3NV04-E Overview
It's?packaged?in?the way?of?a?Tube.In the TO-252-3, DPak (2 Leads + Tab), SC-63 package, it is included.The mounting type of the LED driver is Surface Mount.The switch type is General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.As a default, the output is set to 1.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It is a member of the VND3N family.It has a total of 2 terminations.During operation, the 3 pins are used.It contains 1 functions.It is necessary to reduce the maximum output current to 5A to meet the operation criteria.Surface Mount is mounted in the way.This LED driver is equipped with a total of 3 pins.In this case, there is 120mOhm resistance in the LED driving board.It belongs to the OMNIFET II?, VIPower? series.The output current is set to 3.5A in this case.It has a maximum current requirement of 100μA.
VND3NV04-E Features
Resistance of 120mOhm
VND3NV04-E Applications
There are a lot of STMicroelectronics VND3NV04-E Power Switches ICs applications.
- PC Card Hot Swap
- USB3.1 Power Delivery
- Hard Disk Drives
- HDD and SSD
- Hot Swaps
- PDAs
- PC Cards
- Portable GPS
- Portable Video Game Players
- Wireless Headsets