VND3NV04-1-E
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 35W |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND3N |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Interface | On/Off |
| Element Configuration | Single |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 35W |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Rise Time | 250ns |
| Fall Time (Typ) | 250 ns |
| Continuous Drain Current (ID) | 3.5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 120m Ω (Max) |
| Drain to Source Resistance | 120mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 6.5mm |
| Width | 2.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 42 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-251-3 Short Leads, IPak, TO-251AA |
| Number of Pins | 3 |
| Weight | 3.949996g |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
VND3NV04-1-E Overview
It is packaged in the manner of a Tube.There is a TO-251-3 Short Leads, IPak, TO-251AA package that includes it.The mounting type of the LED driver is Through Hole.There is a General Purpose switch type associated with it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.There is a default setting of 1 for output.A voltage of Not Required is used to power it.The maximum output voltage is N-Channel volts.There is a VND3N family of things that it belongs to.The termination count is 3.In order to operate, 3 pins are used.Currently, the lighting driver has a total of 1 functions.This operation requires the maximum output current to be decreased to 5A.It is positioned in the direction of Through Hole.3 pins are connected to it in total.It has a resistance of 120mOhm.It is part of the OMNIFET II?, VIPower? series.It is set to 3.5A in this case.
VND3NV04-1-E Features
Resistance of 120mOhm
VND3NV04-1-E Applications
There are a lot of STMicroelectronics VND3NV04-1-E Power Switches ICs applications.
- Portable GPS Device
- Low Voltage I/O System Power
- USB Power Distribution
- Set-top-box
- Wireless Headsets
- Hot Swap
- Wireless/Networking Cards
- Portable/Handheld Devices
- USB Power Distribution
- Portable Music Players