VND1NV04
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 250mOhm |
| Max Power Dissipation | 35W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Base Part Number | VND1N |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.7A |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 35W |
| Output Current | 1.7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 7A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 1.7A |
| Rds On (Typ) | 250m Ω (Max) |
| Drain to Source Resistance | 260Ohm |
| Turn Off Time | 5.5 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 2.63mm |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VND1NV04 Overview
It is packaged in the form of a Tube.This file is included in package TO-252-3, DPak (2 Leads + Tab), SC-63.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type that it owns.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.There is a default setting of 1 for output.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.It is a member of the VND1N family.The termination count is 2.Currently, the lighting driver has a total of 1 functions.This operation requires the maximum output current to be decreased to 1.7A.The lighting driver is mounted in the direction of Surface Mount.A total of 3 pins are included in this LED driver.In this case, there is 250mOhm resistance in the LED driving board.It is included in the OMNIFET II?, VIPower? series.This case results in a 1.7A output current.It has a maximum current requirement of 100μA.
VND1NV04 Features
Resistance of 250mOhm
VND1NV04 Applications
There are a lot of STMicroelectronics VND1NV04 Power Switches ICs applications.
- Hot-Swap Systems
- HDD and SSD
- Hot Swap
- Storage Drives
- Hot Swaps
- PDAs
- Wireless/Networking Cards
- Portable/Handheld Devices
- Wearable Devices
- Smartphone and PDA