VND1NV04-1-E
| Parameters | |
|---|---|
| Factory Lead Time | 20 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 250mOhm |
| Base Part Number | VND1N |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.7A |
| Interface | On/Off |
| Element Configuration | Single |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Output Current | -3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Rise Time | 500ns |
| Fall Time (Typ) | 600 ns |
| Continuous Drain Current (ID) | 20A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 250m Ω (Max) |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND1NV04-1-E Overview
It is packaged in the manner of a Tube.It is included with the TO-252-3, DPak (2 Leads + Tab), SC-63 package as well.The lighting driver is mounted in the Surface Mount position.The switch type of this switch is General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has a total of 1 outputs.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts on this LED driver.It comes under the family of VND1N.In order to operate, 3 pins are used.This operation requires the maximum output current to be decreased to 1.7A.As a result, it is mounted in the manner of Through Hole.It has a resistance of 250mOhm.Electrical components such as this are included in the OMNIFET II?, VIPower? series.It is set to -3A in this case.A maximum current requirement of 100μA is required for its operation.
VND1NV04-1-E Features
Resistance of 250mOhm
VND1NV04-1-E Applications
There are a lot of STMicroelectronics VND1NV04-1-E Power Switches ICs applications.
- Smartphone and PDA
- PC Card Hot Swap
- PDAs
- Hot Swap
- HDD, SSD
- Storage Drives
- Portable/Handheld Devices
- USB Ports/Hubs
- Solid-State Drives
- USB Power Distribution